ubuntu8.10显示器分辨率和刷新率问题终级解决

    本人还对UBUTU不是很会搞。实际上加起来用了半个月不到。第一次是朋友介绍后学了安装的，安好硬件驱动后开起了特效，但重启进入PC时也就是这个郁闷的显示器分辨率和刷新率问题过低800＊600＿60HZ，当时玩的是8.04版，让我不在玩UBUNTU了。第二次我反复试验，通过百度和论坛，懂点后，也没成功。哎～第三次，我终于成功了，Beautiful~ 我是通过摸索和反复试验自己亲手解决了ubuntu8.10显示器分辨率和刷新率问题，I Believe ~很多网友初学UBUNTU也会遇到我同一样的情况，现在我就在解决方法写出来，对需要解决的朋友有所帮助。呵呵。（已测试并正常使用）

    A。先在系统－系统管理－硬件驱动里选择安装驱动，（本人显示器是LG－17CRT，分辨率1152＊768＿75HZ，显卡是NVIDIA 7300GT－偶选择的是173版本）。显卡SIS的朋友没法开。一般默认推荐安装也可以（装好UBUNTU系统更新＋装汉语包后，点桌面右键－更改桌面背景－视觉效果－正常，系统就会自动推荐驱动，叫你下载安装。） 安好驱动后开起（更改桌面背景－视觉效果－正常）就算开起了特效，重启成就出现显示器分辨率和刷新率问题过低。
    为了方便大家能尽快解决分辨率问题，早日享受3D的震撼效果，我将自己实践经验与大家一起分享。

    B。在终端里输入以下命令对文件进行编辑：

    sudo gedit /etc/X11/xorg.conf

    C。输入超级管理员的密码。（如果之前是使用超级管理员账号登入的话，则自动跳过。）
    打开后你想要的修改Xorg.conf文件资料。

    D。（没安驱动开不起特效，但可以解决你修改Xorg.conf文件错误后还原） /etc/X11/xorg.conf里Ubuntu 8.10原装系统正确文件资料如下：
    # xorg.conf (X.Org X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the xorg.conf manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # Note that some configuration settings that could be done previously
    # in this file, now are automatically configured by the server and settings
    # here are ignored.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    # sudo dpkg-reconfigure -phigh xserver-xorg

    Section "Device"
    Identifier "Configured Video Device"
    EndSection

    Section "Monitor"
    Identifier "Configured Monitor"
    EndSection

    Section "Screen"
    Identifier "Default Screen"
    Monitor "Configured Monitor"
    Device "Configured Video Device"
    EndSection

    （备注：保存后退出重启，这时已经修改）
    E。安好驱动后，解决显示器分辨率和刷新率问题过低，打开系统－系统管理－Nvidia X Server settings(ATI没用过），打开X Server Display Configuration后看右边的Display(就是显示器相关设置），分辨率Resolution很低:随便选如： 640＊320或800＊600， 刷新率Configuration：60HZ 然后点下面Save to X Configuration File 打开 Show Preview...

    把里面的从# xorg.conf (X.Org X Window System server configuration file)包括一项开始把全部复制粘贴到xorg.conf文件，（同时打开原来的xorg.conf文件清空）。找到下面的这一项Option "metamodes" "800x600_60 +0+0"把它改成Option "metamodes" "1152x864_75 +0+0"（根据自己的显示器分辨率和刷新率来改）保存后退出重启，看看成功没有。如果不行找到这两项改下为
    HorizSync 28.0 - 85.0
    VertRefresh 43.0 - 76.0

    哈哈～你就会发现显示器分辨率和刷新率回到正常了，并开起了特效，重新打开那个显卡设置， 系统－系统管理－Nvidia X Server settings看分辨率可以设更高到1920＊1080或1920＊1200。刷新率也可以设成AUTO或60到85了。

    F。嘿～我改了后觉得Too simple,你看后还觉得算简单吧。最后我把我的Xorg.conf文件发出来让大家看看就知道了。哎～NND之前搞这个问题真烦。不过现在一切OK！NO problem,Beautiful.
    我的Xorg.conf文件如下：
    # xorg.conf (X.Org X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the xorg.conf manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # Note that some configuration settings that could be done previously
    # in this file, now are automatically configured by the server and settings
    # here are ignored.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    # sudo dpkg-reconfigure -phigh xserver-xorg

    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    EndSection

    Section "Module"
    Load "glx"
    EndSection

    Section "ServerFlags"
    Option "Xinerama" "0"
    EndSection

    Section "Monitor"
    Identifier "Configured Monitor"
    EndSection

    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "CRT-1"
    HorizSync 28.0 - 85.0
    VertRefresh 43.0 - 76.0
    EndSection

    Section "Device"
    Identifier "Configured Video Device"
    Driver "nvidia"
    Option "NoLogo" "True"
    EndSection

    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7300 GT"
    EndSection

    Section "Screen"
    Identifier "Default Screen"
    Device "Configured Video Device"
    Monitor "Configured Monitor"
    DefaultDepth 24
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "metamodes" "1152x864_75 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection