给虚拟机添加新的磁盘分区
简单记录一下给虚拟机添加新的磁盘分区的步骤。
首先关闭虚拟机，然后选择设置，添加硬盘，创建一个虚拟磁盘，选择SCSI类型，设置磁盘的容量，并指定保存的操作系统文件名称。
下面就可以启动虚拟机。
登陆到虚拟机，切换到root用户：
[root@yangtk ~]# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
3142384 2963560 16624 100% /
/dev/sda1 101086 10876 84991 12% /boot
/dev/mapper/VolGroup00-LogVol03
8919192 6665924 1792880 79% /data
tmpfs 257800 0 257800 0% /dev/shm
/dev/mapper/VolGroup00-LogVol02
1015704 34452 928824 4% /tmp
[root@yangtk disk]# cd /dev/disk/by-path
[root@yangtk by-path]# ls -l
total 0
lrwxrwxrwx 1 root root 9 Oct 21 06:00 pci-0000:00:07.1-ide-0:0 -> ../../hdc lrwxrwxrwx 1 root root 9 Oct 21 06:00 pci-0000:00:10.0-scsi-0:0:0:0 -> ../../sda lrwxrwxrwx 1 root root 10 Oct 21 06:00 pci-0000:00:10.0-scsi-0:0:0:0-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Oct 21 06:00 pci-0000:00:10.0-scsi-0:0:0:0-part2 -> ../../sda2 lrwxrwxrwx 1 root root 9 Oct 21 06:00 pci-0000:00:10.0-scsi-0:0:1:0 -> ../../sdb
[root@yangtk by-path]# fdisk /dev/sdb -l
Disk /dev/sdb: 2147 MB, 2147483648 bytes 255 heads, 63 sectors/track, 261 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdb doesn't contain a valid partition table
[root@yangtk by-path]# fdisk /dev/sdb (进行分区)
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-261, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-261, default 261):
Using default value 261
Command (m for help): t
Selected partition 1
Hex code (type L to list codes): 8e
Changed system type of partition 1 to 8e (Linux LVM)
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table. Syncing disks.
[root@yangtk by-path]# fdisk /dev/sdb -l
Disk /dev/sdb: 2147 MB, 2147483648 bytes 255 heads, 63 sectors/track, 261 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 261 2096451 8e Linux LVM
[root@yangtk by-path]# mkdir /data1
[root@yangtk by-path]# mount -t ext3 /dev/sdb1 /data1
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
[root@yangtk by-path]# mkfs.ext3 /dev/sdb1 （制作文件系统）
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
262144 inodes, 524112 blocks 26205 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=536870912
16 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@yangtk by-path]# mount -t ext3 /dev/sdb1 /data1（挂载分区）
[root@yangtk by-path]# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
3142384 2963564 16620 100% /
/dev/sda1 101086 10876 84991 12% /boot
/dev/mapper/VolGroup00-LogVol03
8919192 6665924 1792880 79% /data
tmpfs 257800 0 257800 0% /dev/shm
/dev/mapper/VolGroup00-LogVol02
1015704 34452 928824 4% /tmp
/dev/sdb1 2063504 35880 1922804 2% /data1
&nb
sp; 登陆到系统，新添加的分区不会自动加载，需要在linux环境下去手工mount，首先检查新增的磁盘在linux中对应的设备名称。使用fdisk为磁盘分区建立分区表，并设置为Linux LVM类型。
下面仍然不能直接mount，否则会报错：wrong fs type, bad option, bad superblock on /dev/sdb1
需要使用mkfs建立文件系统，下面就可以通过mount命令来加载这个磁盘了。
如果需要系统重启后可以自动加载，需要将其添加到/etc/fstab文件中，在文件中加入下面的内容既可。
/dev/sdb1 /data1 ext3 defaults 1 2
本文作者:未知- 最新评论